Learn How To Install Putting Green
Installing putting green artificial turf professionally requires attention to detail and precision. Here is a detailed guide on how to install putting green turf:
Materials and Tools:
- Putting green artificial turf
- Crushed stone or decomposed granite base
- Landscape fabric
- Bender board or flexible edging
- Nails or stakes
- Putting green cups and flags
- Putting green sand or specialized infill
- Vibratory plate compactor
- Turf adhesive
- Utility knife
- Tape measure
- Shovel
- Rake
- Broom
Putting Green Artificial Turf Installation Steps:
-
Site Preparation:
- Clear the area of existing grass, weeds, and debris.
- Excavate the site to a depth of about 3 to 4 inches.
- Compact the soil using a vibratory plate compactor to create a solid base.
-
Base Installation:
- Spread a layer of crushed stone or decomposed granite evenly over the excavated area.
- Compact the base material thoroughly to create a firm and level surface.
-
Install Landscape Fabric:
- Lay down landscape fabric over the compacted base to prevent weed growth.
-
Edging Installation:
- Install bender board or flexible edging around the perimeter of the putting turf area, securing it with stakes or nails.
-
Add Base Material:
- Add a layer of putting green sand or specialized infill material over the landscape fabric.
-
Compact the Base Material:
- Use a vibratory plate compactor to compact the infill material, ensuring a smooth and consistent surface.
-
Unroll the Turf:
- Roll out the putting artificial turf over the prepared base, allowing it to acclimate to the environment for a few hours.
-
Trim and Shape:
- Trim the turf edges using a utility knife, ensuring a precise fit along the contours of the putting green.
-
Secure Edges:
- Secure the edges of the turf to the bender board using turf spikes or nails.
-
Infill Application:
- Spread putting green sand or specialized infill over the turf using a drop spreader or by hand.
-
Brush and Groom:
- Use a power broom or stiff brush to groom the turf fibers, ensuring they stand upright and creating a smooth putting surface.
-
Cup Installation:
LawnKing Gardens | Putting Green Artificial Turf Bedfordview - Install cups at desired locations on the putting green, securing them in place.
-
Flag Insertion:
- Insert flags into the cups, adjusting their height based on the desired difficulty level.
-
Fine-Tune the Surface:
- Fine-tune the putting artificial turf surface by adding or redistributing infill as needed.
-
Turf Adhesive (Optional):
- If required, use turf adhesive to secure seams or edges for a seamless appearance.
-
Final Inspection:
- Conduct a final inspection, checking for any unevenness, bumps, or imperfections in the grass surface.
Following these steps with precision and attention to detail will result in a professionally installed putting green artificial turf that offers a smooth and enjoyable surface for golf enthusiasts. Get in touch with us for a Free Quote on Artificial Grass Today!